Stationära maskiner

GX 75: For grinding, polishing welding joints, chamfering, deburring or surface grinding. With sanding area of ??75 x 420 mm, height-adjustable flat sanding table and a simple belt adjustment. Robust three-phase current motor enables grinding at a constant speed. Material-adapted work thanks to self-regulating belt tension. Integrated connection for dust extraction (Ø 90 mm) Removable chip container.
Cooling lubrication module GXW: For water grinding. The sanding dust is bound immediately, the cooling extends the life of the sanding belts, thanks to reduced heat generation during sanding, the risk of corrosion on stainless steel pipes decreases. A closed circuit ensures that the cooling lubricant is handled sparingly.

Powerful and reliable belt sander with 4.1 hp 3-phase motor. Band dimension 75x2000 mm. For coarse and fine grinding. Stable construction. Easy setup and adjustment. Easy band change. Adjustable eye protection. Large surface sanding table with graphite base. Angle stop for surface sanding table. Optimum safety with built-in emergency stop and engine brake.

Bandsaw with large cutting capacity 105 mm. It cuts without cooling and has a simple blade tension. Adjustable left cutting angle from 0° to 45°. Professional angle cutting with prismatic guides. Powerful 950 W single-phase motor with digital electronic speed controller, "constant speed" with amperometric limiting device. Recovery function. Stable and robust pressed steel base. Soft handle. Saw bracket locking for easy handling. Marking with clear cutting indications.
Standard equipment: Adjustable length stop for mass-produced cutting. (L = 500 mm). Extra leaf cleaning filter. Filter circuit for electromagnetic interference attenuation according to current regulations. Band saw blade 1335x13x0.65 mm - 8/12T.

Bandsaw with 4 feed speeds with mechanical selector. Automatic switch after completion of cutting. Equipped with emergency stop. Energy-saving 100% engine efficiency is provided by the exclusive ABS system. Fast cutting thanks to the opposite direction of rotation of the band saw blade. Innovative blade tension device with coupling to check and adjust the correct tension of the blade. Caper without cooling. Adjustable left cutting angle from 0° to 60°. Powerful 1300 W single-phase motor equipped with digital electronic speed controller with amperometric limiting device. Recovery function. Dual adjustable, front and rear, saw blade guides. Saw bracket locking for easy handling. Ergonomic handle.
Standard equipment: Adjustable length stop for mass-produced cutting. (L = 500 mm). Filter circuit for electromagnetic interference attenuation according to current regulations. Supplied with band saw blade 1440x13x0.65 mm - 14T.

Bandsaw with 4 feed speeds with mechanical selector. Automatic switch after completion of cutting. Equipped with emergency stop. Energy-saving 100% engine efficiency is provided by the exclusive ABS system. Fast cutting thanks to the opposite direction of rotation of the band saw blade. Innovative blade tension device with coupling to check and adjust the correct tension of the blade. Caper without cooling. Adjustable left cutting angle from 0° to 45°. Powerful 2000 W single-phase motor equipped with digital electronic speed controller with amperometric limiting device. Recovery function. Dual adjustable, front and rear, saw blade guides. Saw bracket locking for easy handling. Ergonomic handle.
Standard equipment: Adjustable length stop for mass-produced cutting. (L = 500 mm). Filter circuit for electromagnetic interference attenuation according to current regulations. Supplied with band saw blade 1735x13x0.9 mm - 14T.

Band saw with fast cutting thanks to the opposite direction of rotation of the band saw blade. Innovative blade tension device with coupling to check and adjust the correct tension of the blade. Caper without cooling. Cutting capacity: 120 mm round, 120 x 102 mm rectangular. Adjustable left cutting angle from 0° to 60° with quick locking at 45° and 60°. Powerful 1300 W single-phase motor equipped with digital electronic speed controller "Constant speed" with amperometric limiting device. Recovery function. Dual adjustable, front and rear, saw blade guides. Saw bracket locking for easy handling. Ergonomic handle.
Standard equipment: Adjustable length stop for mass-produced cutting. (L = 500 mm), tool for changing saw blades, filter circuit for electromagnetic interference suppression according to current regulations. Supplied with band saw blade 1440x13x0.65 mm - 14T.

Band saw with pivoting saw frame with 2 band speeds. Stage I for steel, stainless steel, aluminum etc. Stage II for steel pipes, stainless steel, aluminium. Stepless and keyless setting of cutting angle 0-45°. Very easy to release for freehand work. Ball bearing 3-point track guide for stability. Self-cooling. Safety switch with non-return in the event of a power failure. Works without coolant. SBG eliminates the risk of fire through spark-free cutting in metal. Suitable band: 1335x13 mm
Standard equipment: 1 pc parallel stop and 1 pc saw band made of bimetal.
* = Band saw blade in bimetal M42 for steel, stainless steel, non metals and aluminum. Variable teeth for vibration-free running. Positive cutting angle for easier and more cost-effective sawing.
** = Band saw blade in bimetal with extra hardened teeth. Specially adapted for thin-walled pipes and profiles.

A simple way to sharpen drill bits. Integrated fixture in the machine for the drill chuck. Stable drill chuck keeps each drill in exactly the right position during grinding. With a few revolutions of turning the drill chuck, the drill is ground at the right angle. The diamond disc is enough for hundreds of grindings. Grinds HSS, Carbide, Tin-coated and concrete drills. Can grind tip angles 118° and 135°. Cross grinding can be performed. The desired grinding depth can be preset.
Supplied in a storage box.

Bench sander for light sanding work in crafts and industry. Ball-bearing spider. Closed protective hoods and folding protective glasses. Manufactured for 3-phase 400 V or 1-phase 230 V alternating current. Motor and other electrical equipment - protection class IP 44. Supplied complete with sanding discs and adjustable sanding supports as well as 1.5 m cable.
As additional accessories there is belt sanding equipment (for mounting on the right side), column with table and water cup  and column with extraction (excl. table and water cup).

Bänkslipmaskin för tyngre sliparbeten inom hantverk och industri. Kraftfull 3-fas, 400 V motor på 750 W. Avsedd för slipskivor med Ø 200 mm. Kullagrad spindel. Slutna skyddshuvar och fällbara skyddsglas. Motor och övrig elektrisk utrustning i kapslingsklass IP44. Försedd med säkerhetsströmbrytare med nödstopp. Som extra tillbehör finns bandsliputrustning (för montage på höger sida), pelare med bord och vattenkopp samt pelare med utsug (exkl. bord och vattenkopp). 
Levereras komplett med slipskivor och ställbara slipstöd samt 1,5 m kabel.

Belt-driven bench drill with powerful 750 W motor, 12 speeds and drill capacity 1-20 mm. Simple and stable construction that ensures easy operation and long service life. Raised and lowered table with tilt function. Integrated work lighting. Transparent protective screen with micro switch for extra safety. With safety switch and emergency stop in accordance with CE requirements. Supplied with B16 spindle and quick chuck with auto lock. Available in both 1-phase and 3-phase versions.
Model 16 AT with right and left hand (reversible).

Bench sander for universal use with sanding belt and sanding disc for processing wood and metal. For grinding, sharpening, deburring and de-rusting steel and metal. Suitable for use with round steel brushes for derusting, Large belt sander arm with stepless 90° inclination for two standard sanding belt lengths. Tool-free tilt adjustment of the belt sander arm. Flexible work on the large sanding surface or on the rounding of the belt sanding arm. Extraction connection on the belt sander arm, fits with standard coupling sleeves. Rubber drive wheels in the belt sander arm with grooves for quick heat dissipation. Quick, tool-free sanding belt change when the cover is opened. Extremely quiet operation and long service life of the discs thanks to the high-quality mounting flange. LED lighting.
Standard equipment: Standard corundum grinding disc 60 N Ø 200 mm, woven sanding belt K 60, protective glass, work piece support surface and hexagon key.

Made of flame-resistant fabric. Suitable for belt sanders and extraction devices. Max connection diameter 130 mm.

Precision manufactured. Fully hardened. Sanded inside and out. Conicity according to system Morse. External tool cones with tongue according to Swedish standard SS 100.
Cone indicates external/internal cone.

For repeating the shape of the edge on lathes and chisels when grinding with the jigs SVD-185 and SVS-50. With built-in geometries.

Utdriverkiler for verktøykoner. Dimensjoner i henhold til SMS 98.

Compact belt sander for metalworking. Innovative pillar construction that saves space in the workshop. Powerful 1.5 kW 3-phase motor with overload protection. Short changeover times, quick replacement of sanding belts. Maximum work safety through controlled spark formation. Equipped with spark protection, sanding support and chip box.
Standard equipment: 1 sanding belt 75x2000 mm K36 Type R.

Radius grinding module for fine grinding of pipes, profiles and flat iron. Adapted for use together with Grit belt sander GX 75 (2H). For precise grinding of radii (with a diameter of 16 to 90 mm) on pipes and profiles. Integrated depth stop. Length allowance is available for serial use. Angle settings possible up to 90°. Contact rollers are available in the most common dimensions.
Standard equipment: 1 pc contact roller Ø 42.4 mm, 1 pc contact roller Ø 48.3 mm, 1 pc sanding belt 75x2250 mm grain 36 and dust container.

Sighting disc intended for processing machines. Mounted on the inside of the window of the machine and provides a clear view into the processing space when cutting fluid is used. Thickness 0.3mm. Supplied with microfiber cloth and scraper for assembly.

Accessories for Tormek grinding machines.

Turning plate that rotates the machine 180° and locks it stably in grinding position. Makes it easy to alternate grinding/grinding or with/counter grinding.
Fits grinders T-7, T-3, 2000, 1200, SA-250 and N-1500.

Wet sander for home and hobby. The central functions of the machine such as the motor, main shaft and the brackets for the universal support are integrated in the molded upper part. Unique and effective whetstone made of aluminum oxide. Browning and polishing takes place on a leather brow disc and can also be done with grinding jigs, which gives full control and razor sharpness. The universal support, which is the base of the system, has a flat thread with fine adjustment for precision adjustment. The universal support can be positioned vertically for counter-grinding or horizontally for co-grinding. With the stone adjuster, you can change its surface from quick grinding to finer grinding, corresponding to 1000 grains. Stand in ABS plastic. Main shaft in stainless steel. Maintenance-free fully enclosed 1-phase motor. Quiet running. The tools are controlled with special jigs, only a small amount of steel is ground away with each grinding, which makes the method very fast and extends the life of the tools. Complete with jigs for the tools you are going to sharpen and you get a system that fully meets your grinding needs.
Standard equipment: Grinding stone (SG-200), leather sharpening disc (LA-145), universal support (US- 103), stone adjuster (SP-650), protractor (WM-200), brow paste (PA-70), edge marker (EM-15) manual and instructional DVD.

Wet sander for craftsmen, demanding do-it-yourselfers and schools. Fully cast stand for maximum precision. Sides in impact-resistant blue ABS plastic. Mechanical water box, for less spillage of water. Scraper with built-in magnet, for easier cleaning of the water trough. The tools are controlled with special jigs, only a small amount of steel is ground away with each grinding, which makes the method very fast. Unique and efficient whetstone (Ø 250 mm) made of aluminum oxide. Browning and polishing is done on the leather brow disc (Ø 220 mm) and can also be done with the jigs, which gives full control and razor-sharp sharpness. The universal support, which is the base with the system, has micro-adjustment for fine-tuning the edge angle. The universal support can be mounted vertically for counter-grinding or horizontally for co-grinding. Main shaft, washers and EzyLock nut in stainless steel. Maintenance-free fully enclosed single-phase motor. Drive wheels in zinc. Silent operation.
Standard equipment: Whetstone (SG-250), leather brow disc (LA-220), grinding jig for straight edges (SE-77), protractor (WM-200), brow paste (PA-70 ), manual, Tormek DVD, turning and sharpening tool (TT-50) and stone adjuster (SP-650).

För utdrivning utan slag. När handtaget föres nedåt pressas kilen in i kilslitsen och driver ut konan.

Efficient belt sander 3-phase, 400 V in a small format. Tape size 100x1000 mm. Adapted for general grinding of smaller workpieces. Based on the modular principle with stable machine stand and integrated dust extraction. Can be used as a table machine. Also suitable for mobile use in workshop and assembly vehicles. Patented strap tensioning system. Can be mounted on machine stand GIXS.
Standard equipment: 1 sanding belt 100x1000 mm grain 60.

GIS 75 and GIS 150: Available in both 75 and 150 mm band width with one speed. Constant speed during use. Robust construction for stable use. With the corresponding module, they are quickly and easily transformed into radius and surface grinders. Supplied complete with stand.
GI 75 and GI 150: Available both with 75 and 150 mm band width and with one or two speeds. Constant speed during use. Robust construction for stable use. With the corresponding module, they are quickly and easily transformed into radius and surface grinders.
Machine stand GIB: Adjustment of the working height using gas pressure springs.
Machine stand GIBE: Adjustment of the working height using gas pressure springs. With double dust extraction. Insensitive to sparks, equipped with metal chip collection, steel dust extraction hoses and a cassette filter.
Plane grinding module GIL: For use in machine building, work with handrails and railings and welding structures. With automatic feed.

Robust bandsaw in stable construction. Intended for sawing wooden and plastic materials. Saw table made of cast iron. Powerful and stable double table cradle that can be tilted +45°. Automatic brake that brakes smoothly and efficiently, which never needs to be adjusted. Unique saw blade guide with ground, hardened and ball-bearing blade guide rollers all around. Optimal protection around the saw blade, made of aluminum profiles, with telescopic function. The tension of the band saw blade is read on a scale that helps you get the right tension. Low noise level. Easy to move the machine with a pallet truck, thanks to recesses in the base. Supplied with side stops. Miter stop and protective gate are available as accessories.
The picture shows the protective gate assembled (not included).

Robust bandsaw in stable construction. Adapted for sawing in many different materials such as wood, plastic, aluminium, steel and iron etc. Just change the saw blade and adjust the speed. Strong motor and variable speed thanks to a frequency control. Saw table made of cast iron. Powerful and stable double table cradle that can be tilted +45°. Automatic brake that brakes smoothly and efficiently, which never needs to be adjusted. Unique saw blade guide with ground, hardened and ball-bearing blade guide rollers all around. Optimal protection around the saw blade, made of aluminum profiles, with telescopic function. The tension of the band saw blade is read on a scale that helps you get the right tension. Low noise level. Easy to move the machine with a pallet truck, thanks to recesses in the base. Supplied with side stops. Miter stop and protective gate are available as accessories.
The picture shows the protective gate assembled (not included).

The band saw MBS is available in different sizes. Stable and sturdy band saw with well-ground and balanced band saw wheels. The saw blade guides are of solid construction with rollers both above and below the table. The blade guide can be raised and lowered via a rack. The table can be folded 30°.
Accessories: Protective gate for craft rooms that prevents students and others from getting too close to the machine. Miter stop for miter sawing.

Band saw with powerful 1850 W single-phase motor with 2 speeds. Adjustable left cutting angle from 0° to 45°. Large cutting capacity 213 x 150 mm. Blade height 19 mm. Possibility to cut with cooling. Stand complete with wheels ideal for transport.
Standard equipment: Filter circuit for electromagnetic interference suppression according to current regulations. Band saw blade 1335x13x0.65 mm - 8/12T.

Bandsaw with 4 feed speeds with mechanical selector. Automatic switch after completion of cutting. Equipped with emergency stop. Energy-saving 100% engine efficiency is provided by the exclusive ABS system. Fast cutting thanks to the opposite direction of rotation of the band saw blade. Innovative blade tension device with coupling to check and adjust the correct tension of the blade. Caper without cooling. Adjustable left cutting angle from 0° to 45°. Powerful 950 W single-phase motor equipped with digital electronic speed controller with amperometric limiting device. Recovery function. Dual adjustable, front and rear, saw blade guides. Saw bracket locking for easy handling. Ergonomic handle. Standard equipment: Adjustable length stop for mass-produced cutting. (L = 500 mm). Filter circuit for electromagnetic interference attenuation according to current regulations. Supplied with band saw blade 1335x13x0.65 mm - 8/12T.

Band saw with fast cutting thanks to the opposite direction of rotation of the band saw blade. Innovative blade tension device with coupling to check and adjust the correct tension of the blade. Caper without cooling. Cutting capacity: 150 mm round, 160 x 140 mm rectangular. Adjustable left cutting angle from 0° to 45°. Powerful 2000 W single-phase motor equipped with digital electronic speed controller "Constant speed" with amperometric limiting device. Recovery function. Dual adjustable, front and rear, saw blade guides. Saw bracket locking for easy handling. Ergonomic handle.
Standard equipment: Adjustable length stop for mass-produced cutting. (L = 500 mm), tool for changing saw blades, filter circuit for electromagnetic interference suppression according to current regulations. Supplied with band saw blade 1735x13x0.9 mm - 6/10T.

Band saw with manual feed down, material feed and vise closure. Lifting of the saw bracket is manual. High-capacity belt guide with two-speed motor. Special reducer with bronze gear, tempered and ground worm gear. Strong blade guides with tight tension bearings and adjustable carbide lugs. Saw blade tension is obtained with electromechanical blade tensioner with micro switch. Quick-locking vice. Accident prevention micro switch on the saw frame cover. Adjustable length stop. Working height table plane 930 mm.
Rolling table for band saw
Adjustable in height for loading / unloading, consisting of 2 meter long modular elements, each with 7 290 mm or 390 mm wide galvanized steel rollers.
Length: 2000 mm
Height min - max: 760-980 mm
Width: 290 / 390
Diameter roll: 50 mm
Number of rolls: 7 pcs Load
Kg/m : 300-350

Bandsaw with automatic gravity-controlled lowering. Manual material feeding, vise closing and saw bracket lifting. High-capacity belt guide with two-speed motor. Special reducer with bronze gear, tempered and ground worm gear. Strong blade guides with tight tension bearings and adjustable carbide lugs. Saw blade tension is obtained with electromechanical blade tensioner with micro switch. Quick-locking vice. Accident prevention micro switch on the saw frame cover. Adjustable length stop. Working height table plane 930 mm.
Rolling table for band saw
Adjustable in height for loading / unloading, consisting of 2 meter long modular elements, each with 7 pcs 290 mm or 390 mm wide galvanized steel rollers.
Length: 2000 mm
Height min - max: 760-980 mm
Width: 290 / 390
Diameter roll: 50 mm
Number of rolls: 7 pcs Load
Kg/m : 300-350

Stable and powerful metal band saw for workshop and industry. Efficient motor with 2 speeds. 3-phase 400 V. Built-in coolant pump. Equipped with swivel head, length stop with scale and easy access to control box. Quick vise release and safety switch for proper blade tightening. Hydraulic feed cylinder. Hydraulic tightening. Quick coupling on vise. Supplied with 1 band saw blade 2450x27x0.9 mm. Coolant not included.

Mechanical band saw, ideal for steel profiles and medium saw volumes. High stability and precision. Gearbox in oil bath. Two saw speeds. Electromechanical blade tension. Vice with quick locking and quick adjustment (pneumatic vice on request). Equipped with a round worktable for precision positioning, while preventing the saw from scratching the surface when cutting is complete. Protection against damage from sawdust and rust. Precision blade guide with carbide lugs and adjustable bearings.
Dual Mode (2 functions): 1. Manual saw bracket with adjustable return spring tension. 2. Gravity-controlled saw bracket with hydraulic cylinder with adjustable saw speed regulator and limit switch.
Accessories: Rolling table.

Manual band saw, ideal for cutting steel and metal. Saw bracket in cast iron. Gearbox in oil bath. Two saw speeds. Mechanical blade stretching. Quick-locking vice. Precision steering with carbide lugs and adjustable bearings. Stand and a saw blade included.

The drill head can be raised and lowered and turned 0-45° in both directions and the desired angle can be set against a graduated washer. Gears made of steel or woven laminate, which provides quiet operation. Shafts of hardened steel. Coupling devices are hardened. The drill spindle is made of steel and can be mounted with ball and roller bearings. The roller bearing is placed around the spindle cone, which provides a stable setting of the tool. The spindle is balanced with a strong spring. For attachment of fresh chuck, the drill spindle is equipped with a threaded spindle nose. During milling work, the spindle sleeve is locked in the desired position. Drill depth stop for spindle feed is easily adjusted with the locking lever against the scale on the front panel. The machine is equipped as standard with a coordinate table with 3 T-slots and an oil strip. The table can be equipped with automatic length feeding. The column is made of steel, which means better rigidity for the machine as well as better precision and minimal deviations from the fixed angle between drill and table. In the lower part of the stand there is room for installing coolant equipment. Tool ejector is built-in and facilitates tool changes. Equipped with emergency stop, undervoltage release and motor protection.
1905-8817: Tool kit MK 3. Machine vise 120 mm. jaws, 2 x T-slot nuts, Chuck 1-13mm B16, Mandrel MK3. Reduction sleeve MK3/MK2. Reduction sleeve MK3/MK1.

For mounting on bench or column sanders E(P) 308 and KEF machines Slibette 6 and 8. Intended for drills with tip angle 118°. The device is based on a simple grinding method that leaves a precise and error-free drill tip without cumbersome settings for different drill sizes. Drill grinding disc not included.
Extra protective screen with opening for drill grinding disc is required.
Type A is mounted on the right side of the machine. For drill diameter 4-30 mm.
Type B is mounted on the left side of the machine. For drill diameter 30-60 mm.

A fast and easy-to-handle drill grinder that has a patented system with mirror-inverted prism that guarantees the highest possible precision and cutting edge symmetry. Works on all types of drills, step drills, center drills for sheet metal and wood, cutters, milling cutters, etc. and steel qualities such as high-speed steel, chrome-vanadium steel, carbide etc.
Supplied complete with 1-speed motor - enclosure class IP 54, drill holder (BSG 60 from 3 to 40 mm), corundum grinding wheel, scraper and for BSG 20 also magnifying glass.